• Home
  • Fab Series® Steering System

FAB SERIES® PATENTED STEERING SYSTEM

ImagePart #DescriptionPriceOrder
Stud Cartridge - 0.657" Small TaperRP65794Stud Cartridge - 0.657" Small Taper

Includes Dust Boot, Lock Nut, Grease Fitting

$123.45
Stud Cartridge - 0.675" Small Taper - Tie Rod EndRP66399Stud Cartridge - 0.675" Small Taper - Tie Rod End

Includes Dust Boot, Castle Nut/Cotter Pin, Lock Nut, Grease Fitting

$123.45
Stud Cartridge - 0.715" Small Taper - Pitman Arm EndRP66400Stud Cartridge - 0.715" Small Taper - Pitman Arm End

Includes Dust Boot, Castle Nut/Cotter Pin, Lock Nut, Grease Fitting

$123.45
Stud Cartridge - 0.750" Straight Stud RP66512AStud Cartridge - 0.750" Straight Stud

Includes Dust Boot, Castle Nut/Cotter Pin, Lock Nut, Grease Fitting
For knuckles previously drilled out for heim joints.

$123.45
Stud Cartridge - 0.577" Small TaperRP66882AStud Cartridge - 0.577" Small Taper

Toyota FJ80 taper

$123.45
Stud Cartridge - 0.582" Small Taper - Knuckle EndRP66933AStud Cartridge - 0.582" Small Taper - Knuckle End

Jeep JL
Includes Dust Boot, Lock Nut, Grease Fitting

$123.45
Stud Cartridge - 0.701" Small Taper - Pitman Arm EndRP66934AStud Cartridge - 0.701" Small Taper - Pitman Arm End

Jeep JL
Includes Dust Boot, Lock Nut, Grease Fitting

$123.45
Stud Cartridge - 0.752" Small TaperRP69241Stud Cartridge - 0.752" Small Taper

Includes Dust Boot, Lock Nut, Grease Fitting

$123.45
JK Tie Rod Assembly - Extra OffsetRP29135AJK Tie Rod Assembly - Extra Offset

Includes everything you need, including sleeve

$123.45
JK Drag Link AssemblyRP29428AJK Drag Link Assembly

Includes everything you need, including sleeve

$123.45
JK Tie Rod AssemblyRP29429AJK Tie Rod Assembly

Includes everything you need, including sleeve

$123.45
1.25"-12 Forging with LH ThreadsRP657881.25"-12 Forging with LH Threads

Straight - 12.250" center to end

$123.45
1.25"-12 Forging with RH ThreadsRP657891.25"-12 Forging with RH Threads

Offset - 11.909" center to end

$123.45
1.25"-12 Forging with RH ThreadsRP657901.25"-12 Forging with RH Threads

1.39" Offset - 12.250" center to end

$123.45
1.25"-12 Forging with LH ThreadsRP657911.25"-12 Forging with LH Threads

1.39" Offset - 12.250" center to end

$123.45
Unthreaded Forging for Custom Thread and LengthRP65831Unthreaded Forging for Custom Thread and Length

12.250" center to end

$123.45
1.25"-12 Forging with RH ThreadsRP659071.25"-12 Forging with RH Threads

Straight - 12.250" center to end

$123.45
1.25"-12 TPI Forging with tapered hole and RH Threads RP66003A1.25"-12 TPI Forging with tapered hole and RH Threads

12.500" center to end
Includes Jam Nut

$123.45
7/8"-18 TPI Forging with RH ThreadsRP66396A7/8"-18 TPI Forging with RH Threads

5.750" center to end
Includes Jam Nut

$123.45
7/8"-18 TPI Forging with LH ThreadsRP66397A7/8"-18 TPI Forging with LH Threads

5.750" center to end
Includes Jam Nut

$123.45
1.0"-18 TPI Forging with RH ThreadsRP664671.0"-18 TPI Forging with RH Threads

5.750" center to end
Includes Jam Nut

$123.45
1.0"-18 TPI Forging with LH ThreadsRP664681.0"-18 TPI Forging with LH Threads

5.750" center to end
Includes Jam Nut

$123.45
1.0"-14 TPI Forging with LH ThreadsRP664691.0"-14 TPI Forging with LH Threads

5.750" center to end
Includes Jam Nut

$123.45
1.0"-14 TPI Forging with RH ThreadsRP664701.0"-14 TPI Forging with RH Threads

5.750" center to end
Includes Jam Nut

$123.45
1.25"-12 TPI Forging with LH ThreadsRP664711.25"-12 TPI Forging with LH Threads

Straight - 5.750" center to end
Includes Jam Nut

$123.45
1.25"-12 TPI Forging with RH ThreadsRP664721.25"-12 TPI Forging with RH Threads

Straight - 5.750" center to end
Includes Jam Nut

$123.45
1.0"-14 TPI Forging with tapered hole and LH Threads RP664851.0"-14 TPI Forging with tapered hole and LH Threads

12.500" center to end
Includes Jam Nut

$123.45
1.0"-18 TPI Forging with tapered hole and LH ThreadsRP664861.0"-18 TPI Forging with tapered hole and LH Threads

12.500" center to end
Includes Jam Nut

$123.45
1.25"-12 TPI Forging with tapered hole and LH ThreadsRP664871.25"-12 TPI Forging with tapered hole and LH Threads

12.500" center to end
Includes Jam Nut

$123.45
1.25"-12 Forging with RH Threads RP66616A1.25"-12 Forging with RH Threads

2" Offset - 12.070" center to end

$123.45
1.25"-12 Forging with LH Threads RP66617A1.25"-12 Forging with LH Threads

2" Offset - 12.070" center to end

$123.45
1.25"-12 TPI Forging with Flat and RH Threads RP66991A1.25"-12 TPI Forging with Flat and RH Threads

12.500" center to end
Includes Jam Nut

$123.45
Unthreaded Forging for Custom Thread and LengthRP69072Unthreaded Forging for Custom Thread and Length

5.875" center to end

$123.45
Unthreaded Forging with Tie Rod Connection for Custom Thread and LengthRP69073Unthreaded Forging with Tie Rod Connection for Custom Thread and Length

12.250" center to end

$123.45
7/8"-18 TPI Forging with Tapered Hole and LH ThreadsRP69074A7/8"-18 TPI Forging with Tapered Hole and LH Threads

9.625" center to end
Includes Jam Nut

$123.45
7/8"-18 TPI Threaded Insert with RH ThreadsRP294147/8"-18 TPI Threaded Insert with RH Threads

For 1.00" Internal Diameter (ID) sleeves
1.250" Wrench Flats

$123.45
7/8"-18 TPI Threaded Insert with LH ThreadsRP294157/8"-18 TPI Threaded Insert with LH Threads

For 1.00" Internal Diameter (ID) sleeves
1.250" Wrench Flats

$123.45
Dual Mount Steering ClampRP29697ADual Mount Steering Clamp

For 1.75" OD sleeves

$123.45
1.25"-12 TPI Jam Nut with RH ThreadsEP340404T1.25"-12 TPI Jam Nut with RH Threads

1.8125" Wrench Flats

$123.45
1.25"-12 TPI Jam Nut with LH ThreadsEP333404T1.25"-12 TPI Jam Nut with LH Threads

1.8125" Wrench Flats

$123.45
1.25"-12 TPI Threaded Insert with RH ThreadsRP66442A1.25"-12 TPI Threaded Insert with RH Threads

For 1.50" Internal Diameter (ID) sleeves
1.750" Wrench Flats

$123.45
1.25"-12 TPI Threaded Insert with LH ThreadsRP66443A1.25"-12 TPI Threaded Insert with LH Threads

For 1.50" Internal Diameter (ID) sleeves
1.750" Wrench Flats

$123.45
Serrated Belleville WasherSJS22Serrated Belleville Washer

Lock 7/8" jam nuts to the sleeve

$123.45
Tie Rod Lockout - Prevents offset tie rod assemblies from twisting downRP66583ATie Rod Lockout - Prevents offset tie rod assemblies from twisting down

For use with RP66512 cartridge.
NOTE: Not for use on drag link - for tie rod assembly only

$123.45
Serrated Belleville WasherSJS30Serrated Belleville Washer

Lock 1.25" jam nuts to the sleeve

$123.45
Tie Rod Lockout - Prevents offset tie rod assemblies from twisting downRP66974Tie Rod Lockout - Prevents offset tie rod assemblies from twisting down

For use with RP65794 cartridge.
NOTE: Not for use on drag link - for tie rod assembly only

$123.45
Single Mount Steering ClampRP69109ASingle Mount Steering Clamp

For 1.75" OD sleeves

$123.45
ATSCO 6529 to Toyota FJ80 Drag LinkRP20613AATSCO 6529 to Toyota FJ80 Drag Link

A popular modification for offroad vehicles is to use a GM Saginaw steering box, such as the ATSCO 6529. So we took it upon ourselves to manufacture heavy duty pitman arms so you can connect your drag link.

If you are swapping your steering gear without replacing your FJ80 drag link, this is the pitman arm for you. Cut from a single 1.00" thick piece of heat treated 4140 steel. Made in the USA.

Compatible with RP66882A Cartridge

$123.45
ATSCO 6529 to Chevy 1 Ton Drag LinkRP20620AATSCO 6529 to Chevy 1 Ton Drag Link

A popular modification for offroad vehicles is to use a GM Saginaw steering box, such as the ATSCO 6529. So we took it upon ourselves to manufacture heavy duty pitman arms so you can easily connect a FAB SERIES drag link that uses the 0.715" Stud Cartridge.

If you are running the ATSCO 6529 steering gear, and fabricating a FAB SERIES drag link, this is the pitman arm for you. Simply use the 0.715" Stud Cartridge at the pitman arm end. Cut from a single 1.00" thick piece of heat treated 4140 steel. Made in the USA.

Compatible with RP66400 Cartridge

$123.45
ATSCO 6529 to Chevy 1 Ton Drag Link Alternate Size - Heavy Duty Replacement for 5352278 (OE) / J5352278 (Crown)RP28952AATSCO 6529 to Chevy 1 Ton Drag Link Alternate Size - Heavy Duty Replacement for 5352278 (OE) / J5352278 (Crown)

We received a number of reports that OE and after-market pitman arms for Jeeps were prone to breaking. So we took it upon ourselves to manufacture a heavy duty version.

If you are running the ATSCO 6529 steering gear, and fabricating a FAB SERIES drag link, this is the pitman arm for you. Simply use the 0.675" Stud Cartridge at the pitman arm end. Cut from a single 1.00" thick piece of heat treated 4140 steel. Made in the USA.

$123.45
1:8 ReamerRPASSR0281:8 Reamer

1.5 in/ft reamer - Small taper: 0.438", large taper: 0.813"

$123.45
1:6 ReamerRPASSRA0241:6 Reamer

2.0 in/ft reamer - Small taper: 0.375", large taper: 1.125"

$123.45
1:10 ReamerRPASSRM11.11:10 Reamer

1.2 in/ft reamer (METRIC) - Small taper: 0.437", large taper: 0.887"

$123.45
2" Impact SocketRP692482" Impact Socket

For cartridge installation & removal - 1/2" Drive, 6 Point

$123.45
1:8 ReamerRPASSR0481:8 Reamer

1.5 in/ft reamer - Small taper: 0.750", large taper: 1.3125"

$123.45
1.0"-14 TPI Threaded Insert with RH ThreadsRP294641.0"-14 TPI Threaded Insert with RH Threads

For 1.25" Internal Diameter (ID) sleeves
1.250" Wrench Flats

$123.45
1.0"-14 TPI Threaded Insert with LH ThreadsRP294651.0"-14 TPI Threaded Insert with LH Threads

For 1.25" Internal Diameter (ID) sleeves
1.250" Wrench Flats

$123.45
JK Drag Link AssemblyRP29418AJK Drag Link Assembly

Everything you need except sleeve

$123.45
JK Tie Rod AssemblyRP29419AJK Tie Rod Assembly

Everything you need except sleeve

$123.45
Serrated Belleville WasherSJS25.4Serrated Belleville Washer

Lock 1.0" jam nuts to the sleeve

$123.45